Wireless Wifi Module Shields For Arduino

\r\n\r\n\r\nThis Wifi Shield board is based on Serial to Wi-Fi module Wizfi210 from Wiznet and it is compatible with Arduino and its clones. The Wifi Shield offers you a quick, easy, and effective way to add Wi-Fi capabilities to Arduino. The Wifi Shield allows you to achieve Wifi communication via UART by sending AT commands, which is an ideal solution for whom with limited or no Wi-Fi or RF expertise. The Shield supports data rates up to 11 Mbps, and is compliant with 802.11b.\r\n \r\nFeatures:\r\nSerial(UART) to Wifi.\r\nSimple AT commands for configuration and data communication.\r\nDHCP/Static IP, TCP/UDP, Server/Client, DNS.\r\nOperates with standard 802.11 b/g/n access points at speed up to 11 Mbps (802.11b).\r\n802.11i Security (WEP, WPA, WPA2-PSK, Enterprise).\r\nHigh-throughput hardware AES and RC4 encryption/decryption engines.\r\nLimited AP Feature (Direct Connection to iPhone, iPad and Android-Phone without AP).\r\nUltra low power consumption through dynamic power management.\r\n \r\nSpecifications:\r\nWifi Chip: WizFi210\r\nRadio Protocol: IEEE 802.11b/g/n Compatible\r\nSupported Data Rates: 11, 5.5, 2, 1 Mbps (IEEE 802.11b)\r\nModulation: DSSS and CCK\r\nRF Operating Frequency: 2.4 - 2.497 GHz\r\nAntenna Options: Chip antenna and U.FL connector for external antenna\r\nNetworking Protocols: UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(*)\r\nPower Consumption(Typical): Standby = 34.0 µA Receive = 125.0 mA Transmit = 135.0 mA\r\nRF Output Power (Typical): 8dBm ± 1dBm\r\nSecurity Protocols: WEP, WPA/WPA2-PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP\r\nI/O Interface: UART, SPI(*), I2C(*), WAKE, ALARM, GPIOs\r\nSystem Working Voltage: 3.3V\r\n \r\nPackage list:\r\n1 x Wifi Shield board\r\n1x antenna\r\n \r\nFor more information please visit wiki page\r\n\r\n\r\n